Canon

PTZ Cameras

Canon CR-N300 Specifications

Notification Imagee

PTZ Cameras

Canon CR-N300

4K UHD

1/2.3-type CMOS sensor for stunning quality
20x Optical Zoom

From wide-angle to telephoto
DIGIC DV6 Processor

Guarantees great results in all situations
Support for a wide range of control and streaming protocols

RTMP, NDI|HX*, RTP/RTSP, RTMPS and Canon’s XC Protocol

*NDI is a trademark or registered trademark of NewTek, Inc. in the United States and other countries
Hybrid AF

For fast and accurate focusing even in low light
Optical Image Stabilizer

Exceptional stability for smooth PTZ operation

Specifications in detail

Camera

Image Sensor
Type 1/2.3 (1/2.3 in.) single-plate CMOS sensor
Effective Pixels
approx. 8.29 megapixels (3840 x 2160)
Lens
f=3.67 – 73.4 mm, F/1.8 – 2.8, 20x optical zoom, 8-bladed circular aperture
Optical Zoom
20x optical zoom
Digital Zoom
20x digital zoom
Focal Length
f=3.67 – 73.4 mm, F/1.8 – 2.8,
35mm equivalent focal length:
[4K UHD] approx. 29.3 (W) – 601 mm (T)
[Full HD] approx. 30.5 (W) – 627 mm (T)
Digital
Angle of View
[4K UHD]
Horizontal: 65.6 (W) – 3.6° (T)
Vertical: 39.8° (W) – 2.0° (T)
[Full HD]
Horizontal: 63.5 (W) – 3.4° (T)
Vertical: 38.4° (W) – 1.9° (T)
Minimum Subject Illumination
Approx. 1.5 lux (shutter speed 1/30 sec., frame rate 59.947P (Programmed AE) shooting mode, auto slow shutter on)
Shutter Speed
1/6 – 1/2000 sec. (specific values depend on the frame frequency and frame rate)
Iris
Manual/Automatic aperture
Gain
0.0 dB – 36 dB
ND Filter
Built-in (1/8 at maximum, gradation ND), motor operate
White Balance
AUTO (AWB), Set A, Set B, preset settings (daylight: 5,600 K*, tungsten lamp: 3,200 K*), color temperature setting (2,000 K – 15,000 K), Manual

* Color temperatures are given for reference purposes only.
Focus
Focus mode: Manual, Continuous AF, Face AF, Tracking
AF type: Hybrid AF, Contrast AF
Gamm
Normal1 (Standard), Normal3 (BT.709)
Pan and Tilt
Pan operation range: Horizontal ±170°
Pan operation speed: 0.2° – 300°/sec.
Tilt operation range: Vertical -30° – +100°
Tilt operation speed: 0.2° – 170°/sec.

Pan-Tilt

Protocol
Protocol: XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard Communication (Serial), Standard Communication (IP)

Server

Video Output Format: SDI
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)
– Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI)
– When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.
Video Output Format: HDMI
HDMI 3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit)
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)
– Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI)
– When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.
Video Output Format: IP
3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
– If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format cannot be selected.
– A frame rate that exceeds the frame frequency cannot be selected.
– JPEG has one pattern fixed depending on the frame frequency (format is fixed and cannot be selected)
Resolution: 1280 x 720
When frame frequency is 59.94/50.00 Hz: 14.99 fps, when frame frequency is 23.98 Hz: 11.99 fps, when frame frequency is 29.97/25.00 Hz: 12.50 fps
Video Output Format: USB
Motion JPEG:
1920 x 1080
59.94 Hz: 12.00 fps, 5.00 fps
50.00 Hz: 12.50 fps, 5.00 fps
1280 x 720
59.94 Hz: 12.00 fps, 5.00 fps
50.00 Hz: 12.50 fps, 5.00 fps
640 x 360
59.94 Hz: 12.00 fps, 5.00 fps
50.00 Hz: 12.50 fps, 5.00 fps
Preset
Number of presets: Max. 100 (including home position)

Interface

Communication Control
LAN, Wi-Fi, Serial, IR
Network Terminal
LAN x 1, RJ45, 1000Base-T
3G-SDI OUT Terminal
BNC jack (output only) x 1, 0.8 Vp-p/75 Ω, unbalanced
SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant
Embedded audio, Time code (VITC/LTC)
GEN-LOCK Terminal
-
HDMI OUT Terminal
HDMI connector x 1, output only
RS-422 Terminal
RJ45 connector x 1
INPUT 1/INPUT 2 Terminals
-
MIC Terminal
ϕ3.5 mm stereo mini jack (unbalanced, plug-in power supported)
Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 kΩ or
more/Att.: 20 dB
Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 kΩ or more
Supply Voltage: 2.4 V DC (Bias resistance: 2.2 kΩ)
USB Terminal
Type-A (USB 2.0) x 1 (future expansion)
Type-C (USB 3.0) x 1

Physical Features

Operating Environment
Temperature
0°C – +40°C (+32°F – +104°F)
Humidity
10% – 90% (without condensation)
Power Supply
PoE: PoE+ power supply via LAN connector (IEEE802.3at compliant)
– PoE cannot be used
External power source: 24 V DC (using included AC adaptor)
Power Consumption
PoE+ Input: Approx. 16.2 W* max. (body only)
DC Input: Approx. 15.0 W max. (body only)

* Class 4 (25.5 W required) for power supply devices
Dimensions (W x D x H)
Approx. 154 x 178 x 164 mm (6.06 x 7.01 x 6.46 in.) (excluding protrusions)
Weight
Approx. 2.2 kg (4.86 lb.) (body only)
IP Rating
-